1990 Alpine A 610 vs. 2008 Cadillac DTS

To start off, 2008 Cadillac DTS is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Alpine A 610. In addition, the cost of maintenance, including insurance, on 1990 Alpine A 610 would be higher. At 4,565 cc (8 cylinders), 2008 Cadillac DTS is equipped with a bigger engine. In terms of performance, 2008 Cadillac DTS (292 HP @ 6300 RPM) has 44 more horse power than 1990 Alpine A 610. (248 HP @ 5750 RPM) In normal driving conditions, 2008 Cadillac DTS should accelerate faster than 1990 Alpine A 610. With that said, vehicle weight also plays an important factor in acceleration. 2008 Cadillac DTS weights approximately 224 kg more than 1990 Alpine A 610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 Alpine A 610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Alpine A 610. However, in wet, icy, snow, or gravel driving conditions, 2008 Cadillac DTS, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Cadillac DTS (391 Nm @ 4500 RPM) has 34 more torque (in Nm) than 1990 Alpine A 610. (357 Nm @ 2900 RPM). This means 2008 Cadillac DTS will have an easier job in driving up hills or pulling heavy equipment than 1990 Alpine A 610. 2008 Cadillac DTS has automatic transmission and 1990 Alpine A 610 has manual transmission. 1990 Alpine A 610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Cadillac DTS will be easier to drive especially in heavy traffic.

Compare all specifications: