1990 Audi 200 vs. 1990 Fiat Tempra

To start off, both 1990 Audi 200 and 1990 Fiat Tempra were released in the same year (1990). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,144 cc (5 cylinders), 1990 Audi 200 is equipped with a bigger engine. In terms of performance, 1990 Audi 200 (180 HP @ 5700 RPM) has 70 more horse power than 1990 Fiat Tempra. (110 HP @ 6000 RPM). In normal driving conditions, 1990 Audi 200 should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 1990 Audi 200 weights approximately 280 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Audi 200 (252 Nm @ 3600 RPM) has 112 more torque (in Nm) than 1990 Fiat Tempra. (140 Nm @ 2500 RPM). This means 1990 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra.

Compare all specifications:

1990 Audi 200 1990 Fiat Tempra
Make Audi Fiat
Model 200 Tempra
Year Released 1990 1990
Engine Position Front Front
Engine Size 2144 cc 1756 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 180 HP 110 HP
Engine RPM 5700 RPM 6000 RPM
Torque 252 Nm 140 Nm
Torque RPM 3600 RPM 2500 RPM
Engine Bore Size 79.5 mm 84 mm
Engine Stroke Size 86.4 mm 79.2 mm
Engine Compression Ratio 8.8:1 9.5:1
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1480 kg 1200 kg
Vehicle Length 4800 mm 4470 mm
Vehicle Width 1820 mm 1710 mm
Vehicle Height 1430 mm 1450 mm
Wheelbase Size 2700 mm 2550 mm