1990 Audi Coupe vs. 2008 BMW 525

To start off, 2008 BMW 525 is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Audi Coupe. In addition, the cost of maintenance, including insurance, on 1990 Audi Coupe would be higher. At 2,494 cc, 2008 BMW 525 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 525 weights approximately 155 kg more than 1990 Audi Coupe.

Because 1990 Audi Coupe is four wheel drive (4WD), it will have significant more traction and grip than 2008 BMW 525. In wet, icy, snow, or gravel driving conditions, 1990 Audi Coupe will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Audi Coupe (315 Nm @ 2100 RPM) has 70 more torque (in Nm) than 2008 BMW 525. (245 Nm @ 3500 RPM). This means 1990 Audi Coupe will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 525. 2008 BMW 525 has automatic transmission and 1990 Audi Coupe has manual transmission. 1990 Audi Coupe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 525 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Audi Coupe 2008 BMW 525
Make Audi BMW
Model Coupe 525
Year Released 1990 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2226 cc 2494 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 217 HP 0 HP
Torque 315 Nm 245 Nm
Torque RPM 2100 RPM 3500 RPM
Engine Compression Ratio 9.3:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Automatic
Number of Doors 3 doors 4 doors
Vehicle Weight 1420 kg 1575 kg
Vehicle Length 4370 mm 4780 mm
Vehicle Width 1720 mm 1810 mm
Vehicle Height 1380 mm 1440 mm
Wheelbase Size 2530 mm 2840 mm
Fuel Tank Capacity 80 L 70 L