1990 Audi Coupe vs. 2008 Chrysler 300

To start off, 2008 Chrysler 300 is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Audi Coupe. In addition, the cost of maintenance, including insurance, on 1990 Audi Coupe would be higher. At 6,059 cc (8 cylinders), 2008 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2008 Chrysler 300 (425 HP @ 6200 RPM) has 208 more horse power than 1990 Audi Coupe. (217 HP @ 5900 RPM) In normal driving conditions, 2008 Chrysler 300 should accelerate faster than 1990 Audi Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler 300 weights approximately 395 kg more than 1990 Audi Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 Audi Coupe is four wheel drive (4WD), it will have significant more traction and grip than 2008 Chrysler 300. In wet, icy, snow, or gravel driving conditions, 1990 Audi Coupe will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler 300 (570 Nm @ 4800 RPM) has 255 more torque (in Nm) than 1990 Audi Coupe. (315 Nm @ 2100 RPM). This means 2008 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1990 Audi Coupe. 2008 Chrysler 300 has automatic transmission and 1990 Audi Coupe has manual transmission. 1990 Audi Coupe will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Audi Coupe 2008 Chrysler 300
Make Audi Chrysler
Model Coupe 300
Year Released 1990 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2226 cc 6059 cc
Engine Cylinders 5 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 217 HP 425 HP
Engine RPM 5900 RPM 6200 RPM
Torque 315 Nm 570 Nm
Torque RPM 2100 RPM 4800 RPM
Engine Compression Ratio 9.3:1 10.3:1
Drive Type 4WD Front
Transmission Type Manual Automatic
Number of Doors 3 doors 4 doors
Vehicle Weight 1420 kg 1815 kg
Vehicle Length 4370 mm 5010 mm
Vehicle Width 1720 mm 1890 mm
Vehicle Height 1380 mm 1480 mm
Wheelbase Size 2530 mm 3050 mm
Fuel Tank Capacity 80 L 72 L