1990 Austin Maestro vs. 1965 Bristol 408

To start off, 1990 Austin Maestro is newer by 25 year(s). Which means there will be less support and parts availability for 1965 Bristol 408. In addition, the cost of maintenance, including insurance, on 1965 Bristol 408 would be higher. At 5,130 cc (8 cylinders), 1965 Bristol 408 is equipped with a bigger engine. In terms of performance, 1965 Bristol 408 (215 HP @ 4400 RPM) has 149 more horse power than 1990 Austin Maestro. (66 HP @ 5600 RPM) In normal driving conditions, 1965 Bristol 408 should accelerate faster than 1990 Austin Maestro. With that said, vehicle weight also plays an important factor in acceleration. 1965 Bristol 408 weights approximately 670 kg more than 1990 Austin Maestro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1965 Bristol 408 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1965 Bristol 408. However, in wet, icy, snow, or gravel driving conditions, 1990 Austin Maestro, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1965 Bristol 408 (464 Nm @ 2800 RPM) has 362 more torque (in Nm) than 1990 Austin Maestro. (102 Nm @ 3500 RPM). This means 1965 Bristol 408 will have an easier job in driving up hills or pulling heavy equipment than 1990 Austin Maestro. 1965 Bristol 408 has automatic transmission and 1990 Austin Maestro has manual transmission. 1990 Austin Maestro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1965 Bristol 408 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Austin Maestro 1965 Bristol 408
Make Austin Bristol
Model Maestro 408
Year Released 1990 1965
Engine Position Front Front
Engine Size 1273 cc 5130 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 66 HP 215 HP
Engine RPM 5600 RPM 4400 RPM
Torque 102 Nm 464 Nm
Torque RPM 3500 RPM 2800 RPM
Engine Bore Size 70.6 mm 98.6 mm
Engine Stroke Size 81.3 mm 84.1 mm
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 4 seats
Vehicle Weight 915 kg 1585 kg
Vehicle Length 4060 mm 4920 mm
Vehicle Width 1690 mm 1740 mm
Vehicle Height 1420 mm 1510 mm
Wheelbase Size 2580 mm 2910 mm
Fuel Tank Capacity 34 L 81 L