1990 Beijing BJ 212 vs. 1963 Lancia Fulvia
To start off, 1990 Beijing BJ 212 is newer by 27 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, both vehicles can yield 87 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 460 kg more than 1963 Lancia Fulvia.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1963 Lancia Fulvia. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Beijing BJ 212 (181 Nm @ 2000 RPM) has 67 more torque (in Nm) than 1963 Lancia Fulvia. (114 Nm @ 4500 RPM). This means 1990 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia.
Compare all specifications:
1990 Beijing BJ 212 | 1963 Lancia Fulvia | |
Make | Beijing | Lancia |
Model | BJ 212 | Fulvia |
Year Released | 1990 | 1963 |
Engine Size | 2066 cc | 1298 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | V |
Horse Power | 87 HP | 87 HP |
Engine RPM | 4250 RPM | 6000 RPM |
Torque | 181 Nm | 114 Nm |
Torque RPM | 2000 RPM | 4500 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1070 kg |
Vehicle Length | 3910 mm | 4120 mm |
Vehicle Width | 1760 mm | 1560 mm |
Vehicle Height | 1880 mm | 1400 mm |
Wheelbase Size | 2310 mm | 2510 mm |