1990 Beijing BJ 212 vs. 1972 Fiat 125
To start off, 1990 Beijing BJ 212 is newer by 18 year(s). Which means there will be less support and parts availability for 1972 Fiat 125. In addition, the cost of maintenance, including insurance, on 1972 Fiat 125 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1972 Fiat 125 (90 HP @ 5600 RPM) has 3 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1972 Fiat 125 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 570 kg more than 1972 Fiat 125.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1972 Fiat 125. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Beijing BJ 212 (181 Nm @ 2000 RPM) has 50 more torque (in Nm) than 1972 Fiat 125. (131 Nm @ 4000 RPM). This means 1990 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1972 Fiat 125.
Compare all specifications:
1990 Beijing BJ 212 | 1972 Fiat 125 | |
Make | Beijing | Fiat |
Model | BJ 212 | 125 |
Year Released | 1990 | 1972 |
Engine Size | 2066 cc | 1608 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 90 HP |
Engine RPM | 4250 RPM | 5600 RPM |
Torque | 181 Nm | 131 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 960 kg |
Vehicle Length | 3910 mm | 4230 mm |
Vehicle Width | 1760 mm | 1610 mm |
Vehicle Height | 1880 mm | 1450 mm |
Wheelbase Size | 2310 mm | 2430 mm |