1990 Beijing BJ 212 vs. 1973 Porsche 911
To start off, 1990 Beijing BJ 212 is newer by 17 year(s). Which means there will be less support and parts availability for 1973 Porsche 911. In addition, the cost of maintenance, including insurance, on 1973 Porsche 911 would be higher. At 2,994 cc (6 cylinders), 1973 Porsche 911 is equipped with a bigger engine. In terms of performance, 1973 Porsche 911 (226 HP @ 6200 RPM) has 139 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1973 Porsche 911 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 630 kg more than 1973 Porsche 911.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1973 Porsche 911. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Porsche 911 (275 Nm @ 5000 RPM) has 94 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1973 Porsche 911 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.
Compare all specifications:
1990 Beijing BJ 212 | 1973 Porsche 911 | |
Make | Beijing | Porsche |
Model | BJ 212 | 911 |
Year Released | 1990 | 1973 |
Engine Size | 2066 cc | 2994 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | boxer |
Horse Power | 87 HP | 226 HP |
Engine RPM | 4250 RPM | 6200 RPM |
Torque | 181 Nm | 275 Nm |
Torque RPM | 2000 RPM | 5000 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 900 kg |
Vehicle Length | 3910 mm | 4130 mm |
Vehicle Width | 1760 mm | 1690 mm |
Vehicle Height | 1880 mm | 1330 mm |
Wheelbase Size | 2310 mm | 2270 mm |