1990 Beijing BJ 212 vs. 1980 Mercedes-Benz 280
To start off, 1990 Beijing BJ 212 is newer by 10 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 280 would be higher. At 2,746 cc (6 cylinders), 1980 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 280 (182 HP @ 6000 RPM) has 95 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1980 Mercedes-Benz 280 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 280 weights approximately 20 kg more than 1990 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1980 Mercedes-Benz 280. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 280 (233 Nm @ 4500 RPM) has 52 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1980 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212. 1980 Mercedes-Benz 280 has automatic transmission and 1990 Beijing BJ 212 has manual transmission. 1990 Beijing BJ 212 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mercedes-Benz 280 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1990 Beijing BJ 212 | 1980 Mercedes-Benz 280 | |
| Make | Beijing | Mercedes-Benz |
| Model | BJ 212 | 280 |
| Year Released | 1990 | 1980 |
| Engine Size | 2066 cc | 2746 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 87 HP | 182 HP |
| Engine RPM | 4250 RPM | 6000 RPM |
| Torque | 181 Nm | 233 Nm |
| Torque RPM | 2000 RPM | 4500 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1530 kg | 1550 kg |
| Vehicle Length | 3910 mm | 4760 mm |
| Vehicle Width | 1760 mm | 1800 mm |
| Vehicle Height | 1880 mm | 1340 mm |
| Wheelbase Size | 2310 mm | 2830 mm |
