1990 Beijing BJ 212 vs. 1988 Chevrolet Blazer

To start off, 1990 Beijing BJ 212 is newer by 2 year(s). Which means there will be less support and parts availability for 1988 Chevrolet Blazer. In addition, the cost of maintenance, including insurance, on 1988 Chevrolet Blazer would be higher. At 4,300 cc (6 cylinders), 1988 Chevrolet Blazer is equipped with a bigger engine. In terms of performance, 1988 Chevrolet Blazer (158 HP @ 4000 RPM) has 71 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1988 Chevrolet Blazer should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 80 kg more than 1988 Chevrolet Blazer.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1988 Chevrolet Blazer (312 Nm @ 2800 RPM) has 131 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1988 Chevrolet Blazer will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.

Compare all specifications:

1990 Beijing BJ 212 1988 Chevrolet Blazer
Make Beijing Chevrolet
Model BJ 212 Blazer
Year Released 1990 1988
Engine Size 2066 cc 4300 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 87 HP 158 HP
Engine RPM 4250 RPM 4000 RPM
Torque 181 Nm 312 Nm
Torque RPM 2000 RPM 2800 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1530 kg 1450 kg
Vehicle Length 3910 mm 4330 mm
Vehicle Width 1760 mm 1660 mm
Vehicle Height 1880 mm 1630 mm
Wheelbase Size 2310 mm 2560 mm