1990 Beijing BJ 212 vs. 1995 BMW 316
To start off, 1995 BMW 316 is newer by 5 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1995 BMW 316 (101 HP @ 5500 RPM) has 14 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1995 BMW 316 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 220 kg more than 1995 BMW 316.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1995 BMW 316. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Beijing BJ 212 (181 Nm @ 2000 RPM) has 31 more torque (in Nm) than 1995 BMW 316. (150 Nm @ 3900 RPM). This means 1990 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1995 BMW 316.
Compare all specifications:
1990 Beijing BJ 212 | 1995 BMW 316 | |
Make | Beijing | BMW |
Model | BJ 212 | 316 |
Year Released | 1990 | 1995 |
Engine Size | 2066 cc | 1596 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 101 HP |
Engine RPM | 4250 RPM | 5500 RPM |
Torque | 181 Nm | 150 Nm |
Torque RPM | 2000 RPM | 3900 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1310 kg |
Vehicle Length | 3910 mm | 4440 mm |
Vehicle Width | 1760 mm | 1710 mm |
Vehicle Height | 1880 mm | 1370 mm |
Wheelbase Size | 2310 mm | 2710 mm |