1990 Beijing BJ 212 vs. 1996 Caterham 7
To start off, 1996 Caterham 7 is newer by 6 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 1996 Caterham 7 (138 HP @ 7000 RPM) has 51 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1996 Caterham 7 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 1052 kg more than 1996 Caterham 7.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1996 Caterham 7. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Beijing BJ 212 (181 Nm @ 2000 RPM) has 25 more torque (in Nm) than 1996 Caterham 7. (156 Nm @ 5000 RPM). This means 1990 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1996 Caterham 7.
Compare all specifications:
1990 Beijing BJ 212 | 1996 Caterham 7 | |
Make | Beijing | Caterham |
Model | BJ 212 | 7 |
Year Released | 1990 | 1996 |
Engine Size | 2066 cc | 1588 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 138 HP |
Engine RPM | 4250 RPM | 7000 RPM |
Torque | 181 Nm | 156 Nm |
Torque RPM | 2000 RPM | 5000 RPM |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 478 kg |
Vehicle Length | 3910 mm | 3110 mm |
Vehicle Width | 1760 mm | 1580 mm |
Vehicle Height | 1880 mm | 810 mm |
Wheelbase Size | 2310 mm | 2240 mm |