1990 Beijing BJ 212 vs. 1996 Kia Avella
To start off, 1996 Kia Avella is newer by 6 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, both vehicles can yield 87 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 585 kg more than 1996 Kia Avella.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1996 Kia Avella. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Beijing BJ 212 (181 Nm @ 2000 RPM) has 46 more torque (in Nm) than 1996 Kia Avella. (135 Nm @ 4000 RPM). This means 1990 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1996 Kia Avella.
Compare all specifications:
1990 Beijing BJ 212 | 1996 Kia Avella | |
Make | Beijing | Kia |
Model | BJ 212 | Avella |
Year Released | 1990 | 1996 |
Engine Size | 2066 cc | 1498 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 87 HP |
Engine RPM | 4250 RPM | 5000 RPM |
Torque | 181 Nm | 135 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 945 kg |
Vehicle Length | 3910 mm | 3980 mm |
Vehicle Width | 1760 mm | 1670 mm |
Vehicle Height | 1880 mm | 1460 mm |
Wheelbase Size | 2310 mm | 2400 mm |