1990 Beijing BJ 212 vs. 2008 Mazda 3
To start off, 2008 Mazda 3 is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 2008 Mazda 3 (148 HP @ 6500 RPM) has 61 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2008 Mazda 3 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 198 kg more than 2008 Mazda 3.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2008 Mazda 3. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (183 Nm @ 4500 RPM) has 2 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.
Compare all specifications:
1990 Beijing BJ 212 | 2008 Mazda 3 | |
Make | Beijing | Mazda |
Model | BJ 212 | 3 |
Year Released | 1990 | 2008 |
Engine Size | 2066 cc | 1999 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 148 HP |
Engine RPM | 4250 RPM | 6500 RPM |
Torque | 181 Nm | 183 Nm |
Torque RPM | 2000 RPM | 4500 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1332 kg |
Vehicle Length | 3910 mm | 4510 mm |
Vehicle Width | 1760 mm | 1760 mm |
Vehicle Height | 1880 mm | 1470 mm |
Wheelbase Size | 2310 mm | 2650 mm |