1990 Beijing BJ 212 vs. 2009 Kia Sportage

To start off, 2009 Kia Sportage is newer by 19 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 2009 Kia Sportage (140 HP @ 6000 RPM) has 53 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2009 Kia Sportage should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 2009 Kia Sportage weights approximately 12 kg more than 1990 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Kia Sportage (188 Nm @ 4500 RPM) has 7 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2009 Kia Sportage will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.

Compare all specifications:

1990 Beijing BJ 212 2009 Kia Sportage
Make Beijing Kia
Model BJ 212 Sportage
Year Released 1990 2009
Engine Size 2066 cc 1975 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 87 HP 140 HP
Engine RPM 4250 RPM 6000 RPM
Torque 181 Nm 188 Nm
Torque RPM 2000 RPM 4500 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1530 kg 1542 kg
Vehicle Length 3910 mm 4360 mm
Vehicle Width 1760 mm 1810 mm
Vehicle Height 1880 mm 1700 mm
Wheelbase Size 2310 mm 2640 mm