1990 Beijing BJ 212 vs. 2009 Mazda 5

To start off, 2009 Mazda 5 is newer by 19 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,260 cc (4 cylinders), 2009 Mazda 5 is equipped with a bigger engine. In terms of performance, 2009 Mazda 5 (153 HP @ 6500 RPM) has 66 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2009 Mazda 5 should accelerate faster than 1990 Beijing BJ 212.

Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2009 Mazda 5. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mazda 5 (201 Nm @ 4500 RPM) has 20 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2009 Mazda 5 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212. 2009 Mazda 5 has automatic transmission and 1990 Beijing BJ 212 has manual transmission. 1990 Beijing BJ 212 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mazda 5 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Beijing BJ 212 2009 Mazda 5
Make Beijing Mazda
Model BJ 212 5
Year Released 1990 2009
Engine Size 2066 cc 2260 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 87 HP 153 HP
Engine RPM 4250 RPM 6500 RPM
Torque 181 Nm 201 Nm
Torque RPM 2000 RPM 4500 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Front
Transmission Type Manual Automatic
Vehicle Length 3910 mm 4620 mm
Vehicle Width 1760 mm 1760 mm
Vehicle Height 1880 mm 1640 mm
Wheelbase Size 2310 mm 2760 mm