1990 Beijing BJ 212 vs. 2010 BMW 120
To start off, 2010 BMW 120 is newer by 20 year(s). Which means there will be less support and parts availability for 1990 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1990 Beijing BJ 212 would be higher. At 2,066 cc (4 cylinders), 1990 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 2010 BMW 120 (168 HP @ 6700 RPM) has 81 more horse power than 1990 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2010 BMW 120 should accelerate faster than 1990 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1990 Beijing BJ 212 weights approximately 145 kg more than 2010 BMW 120.
Because 1990 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2010 BMW 120. In wet, icy, snow, or gravel driving conditions, 1990 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 120 (210 Nm @ 4250 RPM) has 29 more torque (in Nm) than 1990 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2010 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 1990 Beijing BJ 212.
Compare all specifications:
1990 Beijing BJ 212 | 2010 BMW 120 | |
Make | Beijing | BMW |
Model | BJ 212 | 120 |
Year Released | 1990 | 2010 |
Engine Size | 2066 cc | 1993 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 168 HP |
Engine RPM | 4250 RPM | 6700 RPM |
Torque | 181 Nm | 210 Nm |
Torque RPM | 2000 RPM | 4250 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1385 kg |
Vehicle Length | 3910 mm | 4370 mm |
Vehicle Width | 1760 mm | 1420 mm |
Vehicle Height | 1880 mm | 1760 mm |
Wheelbase Size | 2310 mm | 2670 mm |