1990 BMW 316 vs. 1950 Jeep CJ3A

To start off, 1990 BMW 316 is newer by 40 year(s). Which means there will be less support and parts availability for 1950 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1950 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1950 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1990 BMW 316 (100 HP @ 5500 RPM) has 41 more horse power than 1950 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1990 BMW 316 should accelerate faster than 1950 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1950 Jeep CJ3A weights approximately 30 kg more than 1990 BMW 316.

Because 1950 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1990 BMW 316. In wet, icy, snow, or gravel driving conditions, 1950 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1950 Jeep CJ3A (145 Nm @ 3600 RPM) has 4 more torque (in Nm) than 1990 BMW 316. (141 Nm @ 4250 RPM). This means 1950 Jeep CJ3A will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW 316.

Compare all specifications:

1990 BMW 316 1950 Jeep CJ3A
Make BMW Jeep
Model 316 CJ3A
Year Released 1990 1950
Body Type Sedan SUV
Engine Position Front Front
Engine Size 1596 cc 2199 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 59 HP
Engine RPM 5500 RPM 3600 RPM
Torque 141 Nm 145 Nm
Torque RPM 4250 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 1080 kg 1110 kg
Vehicle Length 4330 mm 3130 mm
Vehicle Width 1650 mm 1460 mm
Vehicle Height 1390 mm 1630 mm
Wheelbase Size 2580 mm 2040 mm