1990 BMW 316 vs. 1986 Chrysler ES

To start off, 1990 BMW 316 is newer by 4 year(s). Which means there will be less support and parts availability for 1986 Chrysler ES. In addition, the cost of maintenance, including insurance, on 1986 Chrysler ES would be higher. At 2,500 cc (4 cylinders), 1986 Chrysler ES is equipped with a bigger engine. In terms of performance, both vehicles can yield 100 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1986 Chrysler ES weights approximately 95 kg more than 1990 BMW 316.

Because 1990 BMW 316 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 BMW 316. However, in wet, icy, snow, or gravel driving conditions, 1986 Chrysler ES, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Chrysler ES (183 Nm @ 2800 RPM) has 42 more torque (in Nm) than 1990 BMW 316. (141 Nm @ 4250 RPM). This means 1986 Chrysler ES will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW 316.

Compare all specifications:

1990 BMW 316 1986 Chrysler ES
Make BMW Chrysler
Model 316 ES
Year Released 1990 1986
Engine Position Front Front
Engine Size 1596 cc 2500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 100 HP
Engine RPM 5500 RPM 4800 RPM
Torque 141 Nm 183 Nm
Torque RPM 4250 RPM 2800 RPM
Engine Compression Ratio 9.0:1 8.7:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 5 seats 7 seats
Vehicle Weight 1080 kg 1175 kg
Vehicle Length 4330 mm 4370 mm
Vehicle Width 1650 mm 1720 mm
Vehicle Height 1390 mm 1350 mm
Wheelbase Size 2580 mm 2470 mm