1990 BMW 316 vs. 2001 Toyota Progress NC 300

To start off, 2001 Toyota Progress NC 300 is newer by 11 year(s). Which means there will be less support and parts availability for 1990 BMW 316. In addition, the cost of maintenance, including insurance, on 1990 BMW 316 would be higher. At 2,997 cc (6 cylinders), 2001 Toyota Progress NC 300 is equipped with a bigger engine. In terms of performance, 2001 Toyota Progress NC 300 (213 HP @ 6000 RPM) has 113 more horse power than 1990 BMW 316. (100 HP @ 5500 RPM) In normal driving conditions, 2001 Toyota Progress NC 300 should accelerate faster than 1990 BMW 316. With that said, vehicle weight also plays an important factor in acceleration. 2001 Toyota Progress NC 300 weights approximately 400 kg more than 1990 BMW 316. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2001 Toyota Progress NC 300 (298 Nm @ 3800 RPM) has 157 more torque (in Nm) than 1990 BMW 316. (141 Nm @ 4250 RPM). This means 2001 Toyota Progress NC 300 will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW 316. 2001 Toyota Progress NC 300 has automatic transmission and 1990 BMW 316 has manual transmission. 1990 BMW 316 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2001 Toyota Progress NC 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 BMW 316 2001 Toyota Progress NC 300
Make BMW Toyota
Model 316 Progress NC 300
Year Released 1990 2001
Engine Position Front Front
Engine Size 1596 cc 2997 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 100 HP 213 HP
Engine RPM 5500 RPM 6000 RPM
Torque 141 Nm 298 Nm
Torque RPM 4250 RPM 3800 RPM
Engine Compression Ratio 9.0:1 10.5:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1080 kg 1480 kg
Vehicle Length 4330 mm 4510 mm
Vehicle Width 1650 mm 1710 mm
Vehicle Height 1390 mm 1440 mm
Wheelbase Size 2580 mm 2790 mm
Fuel Tank Capacity 70 L 70 L