1990 BMW 316 vs. 2002 Chrysler Concorde

To start off, 2002 Chrysler Concorde is newer by 12 year(s). Which means there will be less support and parts availability for 1990 BMW 316. In addition, the cost of maintenance, including insurance, on 1990 BMW 316 would be higher. At 3,516 cc (6 cylinders), 2002 Chrysler Concorde is equipped with a bigger engine. In terms of performance, 2002 Chrysler Concorde (251 HP @ 6400 RPM) has 151 more horse power than 1990 BMW 316. (100 HP @ 5500 RPM) In normal driving conditions, 2002 Chrysler Concorde should accelerate faster than 1990 BMW 316. With that said, vehicle weight also plays an important factor in acceleration. 2002 Chrysler Concorde weights approximately 538 kg more than 1990 BMW 316. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 BMW 316 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 BMW 316. However, in wet, icy, snow, or gravel driving conditions, 2002 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Chrysler Concorde (340 Nm @ 3900 RPM) has 199 more torque (in Nm) than 1990 BMW 316. (141 Nm @ 4250 RPM). This means 2002 Chrysler Concorde will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW 316. 2002 Chrysler Concorde has automatic transmission and 1990 BMW 316 has manual transmission. 1990 BMW 316 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Chrysler Concorde will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 BMW 316 2002 Chrysler Concorde
Make BMW Chrysler
Model 316 Concorde
Year Released 1990 2002
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1596 cc 3516 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 100 HP 251 HP
Engine RPM 5500 RPM 6400 RPM
Torque 141 Nm 340 Nm
Torque RPM 4250 RPM 3900 RPM
Engine Compression Ratio 9.0:1 9.9:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1080 kg 1618 kg
Vehicle Length 4330 mm 5280 mm
Vehicle Width 1650 mm 1900 mm
Vehicle Height 1390 mm 1430 mm
Wheelbase Size 2580 mm 2880 mm
Fuel Tank Capacity 70 L 64 L