1990 BMW 316 vs. 2008 Fiat Palio

To start off, 2008 Fiat Palio is newer by 18 year(s). Which means there will be less support and parts availability for 1990 BMW 316. In addition, the cost of maintenance, including insurance, on 1990 BMW 316 would be higher. At 1,596 cc (4 cylinders), 1990 BMW 316 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1990 BMW 316 weights approximately 85 kg more than 2008 Fiat Palio.

Because 1990 BMW 316 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 BMW 316. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Palio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 BMW 316 (141 Nm @ 4250 RPM) has 39 more torque (in Nm) than 2008 Fiat Palio. (102 Nm @ 3250 RPM). This means 1990 BMW 316 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Palio.

Compare all specifications:

1990 BMW 316 2008 Fiat Palio
Make BMW Fiat
Model 316 Palio
Year Released 1990 2008
Engine Position Front Front
Engine Size 1596 cc 1242 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 0 HP
Torque 141 Nm 102 Nm
Torque RPM 4250 RPM 3250 RPM
Engine Compression Ratio 9.0:1 9.1:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1080 kg 995 kg
Vehicle Length 4330 mm 3830 mm
Vehicle Width 1650 mm 1640 mm
Vehicle Height 1390 mm 1440 mm
Wheelbase Size 2580 mm 2380 mm
Fuel Tank Capacity 70 L 54 L