1990 BMW M3 vs. 2005 Hyundai Getz

To start off, 2005 Hyundai Getz is newer by 15 year(s). Which means there will be less support and parts availability for 1990 BMW M3. In addition, the cost of maintenance, including insurance, on 1990 BMW M3 would be higher. At 2,467 cc (4 cylinders), 1990 BMW M3 is equipped with a bigger engine. In terms of performance, 1990 BMW M3 (238 HP @ 7000 RPM) has 134 more horse power than 2005 Hyundai Getz. (104 HP @ 3200 RPM). In normal driving conditions, 1990 BMW M3 should accelerate faster than 2005 Hyundai Getz. With that said, vehicle weight also plays an important factor in acceleration. 1990 BMW M3 weights approximately 37 kg more than 2005 Hyundai Getz. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 BMW M3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 BMW M3. However, in wet, icy, snow, or gravel driving conditions, 2005 Hyundai Getz, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 BMW M3 (240 Nm @ 4750 RPM) has 96 more torque (in Nm) than 2005 Hyundai Getz. (144 Nm @ 3200 RPM). This means 1990 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2005 Hyundai Getz. 2005 Hyundai Getz has automatic transmission and 1990 BMW M3 has manual transmission. 1990 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Hyundai Getz will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 BMW M3 2005 Hyundai Getz
Make BMW Hyundai
Model M3 Getz
Year Released 1990 2005
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2467 cc 1599 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 238 HP 104 HP
Engine RPM 7000 RPM 3200 RPM
Torque 240 Nm 144 Nm
Torque RPM 4750 RPM 3200 RPM
Engine Bore Size 95.1 mm 76.5 mm
Engine Stroke Size 87 mm 87 mm
Acceleration 0-100mph 6.5 seconds 9.6 seconds
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1200 kg 1163 kg
Wheelbase Size 2570 mm 2390 mm
Fuel Consumption Overall 6.8 L/100km 6.5 L/100km
Fuel Tank Capacity 62 L 45 L