1990 Cadillac Eldorado vs. 1987 Holden Gemini

To start off, 1990 Cadillac Eldorado is newer by 3 year(s). Which means there will be less support and parts availability for 1987 Holden Gemini. In addition, the cost of maintenance, including insurance, on 1987 Holden Gemini would be higher. At 4,473 cc (8 cylinders), 1990 Cadillac Eldorado is equipped with a bigger engine. In terms of performance, 1990 Cadillac Eldorado (177 HP @ 4300 RPM) has 105 more horse power than 1987 Holden Gemini. (72 HP @ 5600 RPM). In normal driving conditions, 1990 Cadillac Eldorado should accelerate faster than 1987 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1990 Cadillac Eldorado weights approximately 686 kg more than 1987 Holden Gemini. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Cadillac Eldorado (325 Nm @ 3000 RPM) has 209 more torque (in Nm) than 1987 Holden Gemini. (116 Nm @ 3600 RPM). This means 1990 Cadillac Eldorado will have an easier job in driving up hills or pulling heavy equipment than 1987 Holden Gemini.

Compare all specifications:

1990 Cadillac Eldorado 1987 Holden Gemini
Make Cadillac Holden
Model Eldorado Gemini
Year Released 1990 1987
Engine Position Front Front
Engine Size 4473 cc 1471 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 177 HP 72 HP
Engine RPM 4300 RPM 5600 RPM
Torque 325 Nm 116 Nm
Torque RPM 3000 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Automatic Automatic
Vehicle Weight 1550 kg 864 kg
Vehicle Length 4850 mm 4040 mm
Vehicle Width 1820 mm 1610 mm
Vehicle Height 1370 mm 1380 mm
Wheelbase Size 2750 mm 2410 mm