1990 Cadillac Seville vs. 1973 Mercedes-Benz 200
To start off, 1990 Cadillac Seville is newer by 17 year(s). Which means there will be less support and parts availability for 1973 Mercedes-Benz 200. In addition, the cost of maintenance, including insurance, on 1973 Mercedes-Benz 200 would be higher. At 4,472 cc (8 cylinders), 1990 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1990 Cadillac Seville (180 HP @ 4300 RPM) has 127 more horse power than 1973 Mercedes-Benz 200. (53 HP @ 4200 RPM). In normal driving conditions, 1990 Cadillac Seville should accelerate faster than 1973 Mercedes-Benz 200. With that said, vehicle weight also plays an important factor in acceleration. 1990 Cadillac Seville weights approximately 205 kg more than 1973 Mercedes-Benz 200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 Mercedes-Benz 200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Mercedes-Benz 200. However, in wet, icy, snow, or gravel driving conditions, 1990 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Cadillac Seville (324 Nm @ 3000 RPM) has 211 more torque (in Nm) than 1973 Mercedes-Benz 200. (113 Nm @ 2400 RPM). This means 1990 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1973 Mercedes-Benz 200. 1990 Cadillac Seville has automatic transmission and 1973 Mercedes-Benz 200 has manual transmission. 1973 Mercedes-Benz 200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1990 Cadillac Seville | 1973 Mercedes-Benz 200 | |
Make | Cadillac | Mercedes-Benz |
Model | Seville | 200 |
Year Released | 1990 | 1973 |
Engine Position | Front | Front |
Engine Size | 4472 cc | 1988 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 180 HP | 53 HP |
Engine RPM | 4300 RPM | 4200 RPM |
Torque | 324 Nm | 113 Nm |
Torque RPM | 3000 RPM | 2400 RPM |
Engine Bore Size | 92 mm | 87 mm |
Engine Stroke Size | 84 mm | 83.6 mm |
Engine Compression Ratio | 10.5:1 | 21.0:1 |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1570 kg | 1365 kg |
Vehicle Length | 4850 mm | 4690 mm |
Vehicle Width | 1830 mm | 1780 mm |
Vehicle Height | 1370 mm | 1450 mm |
Wheelbase Size | 2750 mm | 2760 mm |
Fuel Tank Capacity | 81 L | 65 L |