1990 Chevrolet Corsica vs. 1980 Renault 14

To start off, 1990 Chevrolet Corsica is newer by 10 year(s). Which means there will be less support and parts availability for 1980 Renault 14. In addition, the cost of maintenance, including insurance, on 1980 Renault 14 would be higher. At 1,990 cc (4 cylinders), 1990 Chevrolet Corsica is equipped with a bigger engine. In terms of performance, 1990 Chevrolet Corsica (90 HP @ 5600 RPM) has 20 more horse power than 1980 Renault 14. (70 HP @ 6000 RPM). In normal driving conditions, 1990 Chevrolet Corsica should accelerate faster than 1980 Renault 14. With that said, vehicle weight also plays an important factor in acceleration. 1990 Chevrolet Corsica weights approximately 290 kg more than 1980 Renault 14. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Chevrolet Corsica (146 Nm @ 3200 RPM) has 38 more torque (in Nm) than 1980 Renault 14. (108 Nm @ 3000 RPM). This means 1990 Chevrolet Corsica will have an easier job in driving up hills or pulling heavy equipment than 1980 Renault 14.

Compare all specifications:

1990 Chevrolet Corsica 1980 Renault 14
Make Chevrolet Renault
Model Corsica 14
Year Released 1990 1980
Engine Position Front Front
Engine Size 1990 cc 1360 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 90 HP 70 HP
Engine RPM 5600 RPM 6000 RPM
Torque 146 Nm 108 Nm
Torque RPM 3200 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1180 kg 890 kg
Vehicle Length 4660 mm 4030 mm
Vehicle Width 1740 mm 1630 mm
Vehicle Height 1430 mm 1410 mm