1990 De Tomaso Pantera vs. 1991 Italdesign Nazca
To start off, 1991 Italdesign Nazca is newer by 1 year(s). Which means there will be less support and parts availability for 1990 De Tomaso Pantera. In addition, the cost of maintenance, including insurance, on 1990 De Tomaso Pantera would be higher. At 5,761 cc (8 cylinders), 1990 De Tomaso Pantera is equipped with a bigger engine. In terms of performance, both vehicles can yield 350 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign Nazca (470 Nm @ 4000 RPM) has 10 more torque (in Nm) than 1990 De Tomaso Pantera. (460 Nm @ 4000 RPM). This means 1991 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 1990 De Tomaso Pantera.
Compare all specifications:
| 1990 De Tomaso Pantera | 1991 Italdesign Nazca | |
| Make | De Tomaso | Italdesign |
| Model | Pantera | Nazca |
| Year Released | 1990 | 1991 |
| Body Type | Coupe | Coupe |
| Engine Position | Middle | Middle |
| Engine Size | 5761 cc | 4988 cc |
| Engine Cylinders | 8 cylinders | 12 cylinders |
| Engine Type | V | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 350 HP | 350 HP |
| Engine RPM | 6000 RPM | 5200 RPM |
| Torque | 460 Nm | 470 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Length | 4370 mm | 4400 mm |
| Vehicle Width | 1990 mm | 2090 mm |
| Vehicle Height | 1110 mm | 1120 mm |
| Wheelbase Size | 2520 mm | 2600 mm |
