1990 Fiat Tempra vs. 1976 Mercedes-Benz 280

To start off, 1990 Fiat Tempra is newer by 14 year(s). Which means there will be less support and parts availability for 1976 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1976 Mercedes-Benz 280 would be higher. At 2,746 cc (6 cylinders), 1976 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1976 Mercedes-Benz 280 (174 HP @ 6000 RPM) has 64 more horse power than 1990 Fiat Tempra. (110 HP @ 6000 RPM) In normal driving conditions, 1976 Mercedes-Benz 280 should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 1976 Mercedes-Benz 280 weights approximately 360 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 1990 Fiat Tempra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Mercedes-Benz 280 (233 Nm @ 4500 RPM) has 93 more torque (in Nm) than 1990 Fiat Tempra. (140 Nm @ 2500 RPM). This means 1976 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra.

Compare all specifications:

1990 Fiat Tempra 1976 Mercedes-Benz 280
Make Fiat Mercedes-Benz
Model Tempra 280
Year Released 1990 1976
Engine Position Front Front
Engine Size 1756 cc 2746 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 110 HP 174 HP
Engine RPM 6000 RPM 6000 RPM
Torque 140 Nm 233 Nm
Torque RPM 2500 RPM 4500 RPM
Engine Bore Size 84 mm 86.1 mm
Engine Stroke Size 79.2 mm 78.8 mm
Engine Compression Ratio 9.5:1 8.7:1
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1200 kg 1560 kg
Vehicle Length 4470 mm 4760 mm
Vehicle Width 1710 mm 1800 mm
Vehicle Height 1450 mm 1340 mm
Wheelbase Size 2550 mm 2830 mm