1990 Fiat Tempra vs. 2005 Ford Shelby GR-1 Concept

To start off, 2005 Ford Shelby GR-1 Concept is newer by 15 year(s). Which means there will be less support and parts availability for 1990 Fiat Tempra. In addition, the cost of maintenance, including insurance, on 1990 Fiat Tempra would be higher. At 6,392 cc (10 cylinders), 2005 Ford Shelby GR-1 Concept is equipped with a bigger engine. In terms of performance, 2005 Ford Shelby GR-1 Concept (605 HP @ 6750 RPM) has 541 more horse power than 1990 Fiat Tempra. (64 HP @ 4600 RPM) In normal driving conditions, 2005 Ford Shelby GR-1 Concept should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Shelby GR-1 Concept weights approximately 639 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Ford Shelby GR-1 Concept is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Ford Shelby GR-1 Concept. However, in wet, icy, snow, or gravel driving conditions, 1990 Fiat Tempra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Ford Shelby GR-1 Concept (679 Nm @ 5500 RPM) has 560 more torque (in Nm) than 1990 Fiat Tempra. (119 Nm @ 2000 RPM). This means 2005 Ford Shelby GR-1 Concept will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra.

Compare all specifications:

1990 Fiat Tempra 2005 Ford Shelby GR-1 Concept
Make Fiat Ford
Model Tempra Shelby GR-1 Concept
Year Released 1990 2005
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 1929 cc 6392 cc
Engine Cylinders 4 cylinders 10 cylinders
Engine Type in-line V
Horse Power 64 HP 605 HP
Engine RPM 4600 RPM 6750 RPM
Torque 119 Nm 679 Nm
Torque RPM 2000 RPM 5500 RPM
Engine Bore Size 82.6 mm 93.1 mm
Engine Stroke Size 90 mm 94 mm
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1130 kg 1769 kg
Vehicle Length 4360 mm 4420 mm
Vehicle Width 1690 mm 1900 mm
Vehicle Height 1450 mm 1170 mm
Wheelbase Size 2500 mm 2550 mm