1990 Fiat Tempra vs. 2010 Chrysler Sebring

To start off, 2010 Chrysler Sebring is newer by 20 year(s). Which means there will be less support and parts availability for 1990 Fiat Tempra. In addition, the cost of maintenance, including insurance, on 1990 Fiat Tempra would be higher. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (168 HP @ 6000 RPM) has 58 more horse power than 1990 Fiat Tempra. (110 HP @ 6000 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 740 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (220 Nm @ 4400 RPM) has 80 more torque (in Nm) than 1990 Fiat Tempra. (140 Nm @ 2500 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra. 2010 Chrysler Sebring has automatic transmission and 1990 Fiat Tempra has manual transmission. 1990 Fiat Tempra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Fiat Tempra 2010 Chrysler Sebring
Make Fiat Chrysler
Model Tempra Sebring
Year Released 1990 2010
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1756 cc 2360 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 110 HP 168 HP
Engine RPM 6000 RPM 6000 RPM
Torque 140 Nm 220 Nm
Torque RPM 2500 RPM 4400 RPM
Engine Bore Size 84 mm 88 mm
Engine Stroke Size 79.2 mm 97 mm
Engine Compression Ratio 9.5:1 10.5:1
Drive Type Front Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1133 kg 1873 kg
Vehicle Length 4360 mm 4860 mm
Vehicle Width 1690 mm 1850 mm
Vehicle Height 1450 mm 1500 mm
Wheelbase Size 2550 mm 2770 mm