1990 Ford Mustang vs. 2010 Lancia Ypsilon
To start off, 2010 Lancia Ypsilon is newer by 20 year(s). Which means there will be less support and parts availability for 1990 Ford Mustang. In addition, the cost of maintenance, including insurance, on 1990 Ford Mustang would be higher. At 2,301 cc (4 cylinders), 1990 Ford Mustang is equipped with a bigger engine. In terms of performance, 1990 Ford Mustang (105 HP @ 4600 RPM) has 16 more horse power than 2010 Lancia Ypsilon. (89 HP @ 4000 RPM). In normal driving conditions, 1990 Ford Mustang should accelerate faster than 2010 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1990 Ford Mustang weights approximately 140 kg more than 2010 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Ford Mustang is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Ford Mustang. However, in wet, icy, snow, or gravel driving conditions, 2010 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Lancia Ypsilon (200 Nm @ 1750 RPM) has 17 more torque (in Nm) than 1990 Ford Mustang. (183 Nm @ 2600 RPM). This means 2010 Lancia Ypsilon will have an easier job in driving up hills or pulling heavy equipment than 1990 Ford Mustang.
Compare all specifications:
1990 Ford Mustang | 2010 Lancia Ypsilon | |
Make | Ford | Lancia |
Model | Mustang | Ypsilon |
Year Released | 1990 | 2010 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 2301 cc | 1248 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 105 HP | 89 HP |
Engine RPM | 4600 RPM | 4000 RPM |
Torque | 183 Nm | 200 Nm |
Torque RPM | 2600 RPM | 1750 RPM |
Engine Bore Size | 96 mm | 69.6 mm |
Engine Stroke Size | 79.5 mm | 82 mm |
Engine Compression Ratio | 9.5:1 | 17.6:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1260 kg | 1120 kg |
Vehicle Length | 4560 mm | 3820 mm |
Vehicle Width | 1760 mm | 1710 mm |
Vehicle Height | 1330 mm | 1540 mm |
Wheelbase Size | 2560 mm | 2390 mm |
Fuel Tank Capacity | 45 L | 47 L |