1990 Holden Statesman vs. 1971 Lancia Fulvia
To start off, 1990 Holden Statesman is newer by 19 year(s). Which means there will be less support and parts availability for 1971 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1971 Lancia Fulvia would be higher. At 4,987 cc (8 cylinders), 1990 Holden Statesman is equipped with a bigger engine. In terms of performance, 1990 Holden Statesman (223 HP @ 4400 RPM) has 111 more horse power than 1971 Lancia Fulvia. (112 HP @ 6000 RPM). In normal driving conditions, 1990 Holden Statesman should accelerate faster than 1971 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1990 Holden Statesman weights approximately 565 kg more than 1971 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1971 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Holden Statesman (386 Nm @ 3600 RPM) has 233 more torque (in Nm) than 1971 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 1990 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1971 Lancia Fulvia. 1990 Holden Statesman has automatic transmission and 1971 Lancia Fulvia has manual transmission. 1971 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1990 Holden Statesman | 1971 Lancia Fulvia | |
Make | Holden | Lancia |
Model | Statesman | Fulvia |
Year Released | 1990 | 1971 |
Engine Position | Front | Front |
Engine Size | 4987 cc | 1584 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 223 HP | 112 HP |
Engine RPM | 4400 RPM | 6000 RPM |
Torque | 386 Nm | 153 Nm |
Torque RPM | 3600 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1565 kg | 1000 kg |
Vehicle Length | 4970 mm | 3990 mm |
Vehicle Width | 1820 mm | 1570 mm |
Vehicle Height | 1430 mm | 1330 mm |
Wheelbase Size | 2830 mm | 2340 mm |