1990 Mercedes-Benz 300 vs. 2012 Citroen Berlingo
To start off, 2012 Citroen Berlingo is newer by 22 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1990 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 99 more horse power than 2012 Citroen Berlingo. (89 HP @ 4000 RPM). In normal driving conditions, 1990 Mercedes-Benz 300 should accelerate faster than 2012 Citroen Berlingo. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 300 weights approximately 257 kg more than 2012 Citroen Berlingo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2012 Citroen Berlingo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Mercedes-Benz 300 (260 Nm @ 4800 RPM) has 55 more torque (in Nm) than 2012 Citroen Berlingo. (205 Nm @ 1900 RPM). This means 1990 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2012 Citroen Berlingo. 1990 Mercedes-Benz 300 has automatic transmission and 2012 Citroen Berlingo has manual transmission. 2012 Citroen Berlingo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1990 Mercedes-Benz 300 | 2012 Citroen Berlingo | |
| Make | Mercedes-Benz | Citroen |
| Model | 300 | Berlingo |
| Year Released | 1990 | 2012 |
| Engine Position | Front | Front |
| Engine Size | 2962 cc | 1995 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 188 HP | 89 HP |
| Engine RPM | 5700 RPM | 4000 RPM |
| Torque | 260 Nm | 205 Nm |
| Torque RPM | 4800 RPM | 1900 RPM |
| Engine Bore Size | 88.5 mm | 85 mm |
| Engine Stroke Size | 80.3 mm | 88 mm |
| Engine Compression Ratio | 10.0:1 | 18.0:1 |
| Top Speed | 211 km/hour | 160 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1520 kg | 1263 kg |
| Vehicle Length | 5030 mm | 4140 mm |
| Vehicle Width | 1830 mm | 1730 mm |
| Vehicle Height | 1440 mm | 1820 mm |
| Wheelbase Size | 2940 mm | 2700 mm |
