1990 Mercedes-Benz 300 vs. 2012 Scion xB

To start off, 2012 Scion xB is newer by 22 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1990 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 30 more horse power than 2012 Scion xB. (158 HP @ 6000 RPM). In normal driving conditions, 1990 Mercedes-Benz 300 should accelerate faster than 2012 Scion xB. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 300 weights approximately 147 kg more than 2012 Scion xB. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1990 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2012 Scion xB, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Mercedes-Benz 300 (260 Nm @ 4800 RPM) has 41 more torque (in Nm) than 2012 Scion xB. (219 Nm @ 4000 RPM). This means 1990 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2012 Scion xB. 1990 Mercedes-Benz 300 has automatic transmission and 2012 Scion xB has manual transmission. 2012 Scion xB will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1990 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Mercedes-Benz 300 2012 Scion xB
Make Mercedes-Benz Scion
Model 300 xB
Year Released 1990 2012
Engine Position Front Front
Engine Size 2962 cc 2400 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 188 HP 158 HP
Engine RPM 5700 RPM 6000 RPM
Torque 260 Nm 219 Nm
Torque RPM 4800 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Automatic 5-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1520 kg 1373 kg
Vehicle Length 5030 mm 4249 mm
Vehicle Width 1830 mm 1760 mm
Vehicle Height 1440 mm 1610 mm
Wheelbase Size 2940 mm 2601 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]