1990 Mercedes-Benz 500 vs. 2012 Fiat Ulysse
To start off, 2012 Fiat Ulysse is newer by 22 year(s). Which means there will be less support and parts availability for 1990 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1990 Mercedes-Benz 500 would be higher. At 4,973 cc (8 cylinders), 1990 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1990 Mercedes-Benz 500 (326 HP @ 5700 RPM) has 192 more horse power than 2012 Fiat Ulysse. (134 HP @ 6000 RPM). In normal driving conditions, 1990 Mercedes-Benz 500 should accelerate faster than 2012 Fiat Ulysse. With that said, vehicle weight also plays an important factor in acceleration. 1990 Mercedes-Benz 500 weights approximately 80 kg more than 2012 Fiat Ulysse. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1990 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1990 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat Ulysse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Mercedes-Benz 500 (480 Nm @ 3900 RPM) has 290 more torque (in Nm) than 2012 Fiat Ulysse. (190 Nm @ 4100 RPM). This means 1990 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat Ulysse. 2012 Fiat Ulysse has automatic transmission and 1990 Mercedes-Benz 500 has manual transmission. 1990 Mercedes-Benz 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Fiat Ulysse will be easier to drive especially in heavy traffic.
Compare all specifications:
1990 Mercedes-Benz 500 | 2012 Fiat Ulysse | |
Make | Mercedes-Benz | Fiat |
Model | 500 | Ulysse |
Year Released | 1990 | 2012 |
Engine Position | Front | Front |
Engine Size | 4973 cc | 1997 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 326 HP | 134 HP |
Engine RPM | 5700 RPM | 6000 RPM |
Torque | 480 Nm | 190 Nm |
Torque RPM | 3900 RPM | 4100 RPM |
Engine Bore Size | 96.5 mm | 85 mm |
Engine Stroke Size | 85 mm | 88 mm |
Engine Compression Ratio | 10.0:1 | 11.0:1 |
Top Speed | 251 km/hour | 185 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1730 kg | 1650 kg |
Vehicle Length | 4750 mm | 4730 mm |
Vehicle Width | 1890 mm | 1870 mm |
Vehicle Height | 1430 mm | 1760 mm |
Wheelbase Size | 2810 mm | 2830 mm |