1990 Peugeot 605 vs. 2012 SsangYong Stavic

To start off, 2012 SsangYong Stavic is newer by 22 year(s). Which means there will be less support and parts availability for 1990 Peugeot 605. In addition, the cost of maintenance, including insurance, on 1990 Peugeot 605 would be higher. At 2,696 cc (5 cylinders), 2012 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2012 SsangYong Stavic (163 HP @ 4000 RPM) has 49 more horse power than 1990 Peugeot 605. (114 HP @ 5800 RPM) In normal driving conditions, 2012 SsangYong Stavic should accelerate faster than 1990 Peugeot 605. With that said, vehicle weight also plays an important factor in acceleration. 2012 SsangYong Stavic weights approximately 628 kg more than 1990 Peugeot 605. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 SsangYong Stavic is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 SsangYong Stavic. However, in wet, icy, snow, or gravel driving conditions, 1990 Peugeot 605, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 SsangYong Stavic (340 Nm @ 2400 RPM) has 169 more torque (in Nm) than 1990 Peugeot 605. (171 Nm @ 2250 RPM). This means 2012 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1990 Peugeot 605. 2012 SsangYong Stavic has automatic transmission and 1990 Peugeot 605 has manual transmission. 1990 Peugeot 605 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 SsangYong Stavic will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 Peugeot 605 2012 SsangYong Stavic
Make Peugeot SsangYong
Model 605 Stavic
Year Released 1990 2012
Engine Position Front Front
Engine Size 1997 cc 2696 cc
Engine Cylinders 4 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 114 HP 163 HP
Engine RPM 5800 RPM 4000 RPM
Torque 171 Nm 340 Nm
Torque RPM 2250 RPM 2400 RPM
Engine Bore Size 86 mm 86.3 mm
Engine Stroke Size 86 mm 92.4 mm
Fuel Type Gasoline Diesel
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Vehicle Weight 1295 kg 1923 kg
Vehicle Length 4770 mm 5130 mm
Vehicle Width 1800 mm 1830 mm
Vehicle Height 1420 mm 1920 mm
Wheelbase Size 2810 mm 3010 mm