1991 Audi 80 vs. 1954 Austin Princess

To start off, 1991 Audi 80 is newer by 37 year(s). Which means there will be less support and parts availability for 1954 Austin Princess. In addition, the cost of maintenance, including insurance, on 1954 Austin Princess would be higher. At 3,993 cc (6 cylinders), 1954 Austin Princess is equipped with a bigger engine. In terms of performance, 1954 Austin Princess (118 HP @ 4000 RPM) has 4 more horse power than 1991 Audi 80. (114 HP @ 5400 RPM) In normal driving conditions, 1954 Austin Princess should accelerate faster than 1991 Audi 80. With that said, vehicle weight also plays an important factor in acceleration. 1954 Austin Princess weights approximately 850 kg more than 1991 Audi 80. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1991 Audi 80 is four wheel drive (4WD), it will have significant more traction and grip than 1954 Austin Princess. In wet, icy, snow, or gravel driving conditions, 1991 Audi 80 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1954 Austin Princess (252 Nm @ 2000 RPM) has 85 more torque (in Nm) than 1991 Audi 80. (167 Nm @ 3200 RPM). This means 1954 Austin Princess will have an easier job in driving up hills or pulling heavy equipment than 1991 Audi 80.

Compare all specifications:

1991 Audi 80 1954 Austin Princess
Make Audi Austin
Model 80 Princess
Year Released 1991 1954
Engine Position Front Front
Engine Size 1984 cc 3993 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 114 HP 118 HP
Engine RPM 5400 RPM 4000 RPM
Torque 167 Nm 252 Nm
Torque RPM 3200 RPM 2000 RPM
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1330 kg 2180 kg
Vehicle Length 4490 mm 5470 mm
Vehicle Width 1700 mm 1900 mm
Vehicle Height 1410 mm 1780 mm
Wheelbase Size 2600 mm 3360 mm