1991 Audi S2 vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 17 year(s). Which means there will be less support and parts availability for 1991 Audi S2. In addition, the cost of maintenance, including insurance, on 1991 Audi S2 would be higher. At 2,226 cc (5 cylinders), 1991 Audi S2 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1991 Audi S2 weights approximately 400 kg more than 2008 Ford Bantam.
Because 1991 Audi S2 is four wheel drive (4WD), it will have significant more traction and grip than 2008 Ford Bantam. In wet, icy, snow, or gravel driving conditions, 1991 Audi S2 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Audi S2 (309 Nm @ 1950 RPM) has 199 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1991 Audi S2 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
| 1991 Audi S2 | 2008 Ford Bantam | |
| Make | Audi | Ford |
| Model | S2 | Bantam |
| Year Released | 1991 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2226 cc | 1297 cc |
| Engine Cylinders | 5 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 216 HP | 0 HP |
| Torque | 309 Nm | 110 Nm |
| Torque RPM | 1950 RPM | 3000 RPM |
| Engine Compression Ratio | 9.3:1 | 10.2:1 |
| Acceleration 0-100mph | 6.1 seconds | 12.9 seconds |
| Drive Type | 4WD | Front |
| Transmission Type | Manual | Manual |
| Number of Seats | 4 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1420 kg | 1020 kg |
| Vehicle Length | 4410 mm | 4280 mm |
| Vehicle Width | 1720 mm | 1470 mm |
| Vehicle Height | 1380 mm | 1640 mm |
| Wheelbase Size | 2560 mm | 2670 mm |
| Fuel Consumption Overall | 8.3 L/100km | 8.8 L/100km |
| Fuel Tank Capacity | 70 L | 54 L |
