1991 Beijing BJ 212 vs. 1968 Fiat 2300
To start off, 1991 Beijing BJ 212 is newer by 23 year(s). Which means there will be less support and parts availability for 1968 Fiat 2300. In addition, the cost of maintenance, including insurance, on 1968 Fiat 2300 would be higher. At 2,279 cc (6 cylinders), 1968 Fiat 2300 is equipped with a bigger engine. In terms of performance, 1968 Fiat 2300 (134 HP @ 5600 RPM) has 47 more horse power than 1991 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1968 Fiat 2300 should accelerate faster than 1991 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1991 Beijing BJ 212 weights approximately 220 kg more than 1968 Fiat 2300.
Because 1991 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1968 Fiat 2300. In wet, icy, snow, or gravel driving conditions, 1991 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Beijing BJ 212 (182 Nm @ 2000 RPM) has 2 more torque (in Nm) than 1968 Fiat 2300. (180 Nm @ 4000 RPM). This means 1991 Beijing BJ 212 will have an easier job in driving up hills or pulling heavy equipment than 1968 Fiat 2300.
Compare all specifications:
1991 Beijing BJ 212 | 1968 Fiat 2300 | |
Make | Beijing | Fiat |
Model | BJ 212 | 2300 |
Year Released | 1991 | 1968 |
Engine Size | 2068 cc | 2279 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 134 HP |
Engine RPM | 4250 RPM | 5600 RPM |
Torque | 182 Nm | 180 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1310 kg |
Vehicle Length | 3910 mm | 4630 mm |
Vehicle Width | 1760 mm | 1640 mm |
Vehicle Height | 1880 mm | 1390 mm |
Wheelbase Size | 2310 mm | 2660 mm |