1991 Beijing BJ 212 vs. 1969 BMW 2800
To start off, 1991 Beijing BJ 212 is newer by 22 year(s). Which means there will be less support and parts availability for 1969 BMW 2800. In addition, the cost of maintenance, including insurance, on 1969 BMW 2800 would be higher. At 2,786 cc (6 cylinders), 1969 BMW 2800 is equipped with a bigger engine. In terms of performance, 1969 BMW 2800 (170 HP @ 6000 RPM) has 83 more horse power than 1991 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 1969 BMW 2800 should accelerate faster than 1991 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1991 Beijing BJ 212 weights approximately 196 kg more than 1969 BMW 2800.
Because 1991 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 1969 BMW 2800. In wet, icy, snow, or gravel driving conditions, 1991 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1969 BMW 2800 (236 Nm @ 3700 RPM) has 54 more torque (in Nm) than 1991 Beijing BJ 212. (182 Nm @ 2000 RPM). This means 1969 BMW 2800 will have an easier job in driving up hills or pulling heavy equipment than 1991 Beijing BJ 212.
Compare all specifications:
| 1991 Beijing BJ 212 | 1969 BMW 2800 | |
| Make | Beijing | BMW |
| Model | BJ 212 | 2800 |
| Year Released | 1991 | 1969 |
| Engine Size | 2068 cc | 2786 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 87 HP | 170 HP |
| Engine RPM | 4250 RPM | 6000 RPM |
| Torque | 182 Nm | 236 Nm |
| Torque RPM | 2000 RPM | 3700 RPM |
| Drive Type | 4WD | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1530 kg | 1334 kg |
| Vehicle Length | 3910 mm | 4710 mm |
| Vehicle Width | 1760 mm | 1760 mm |
| Vehicle Height | 1880 mm | 1460 mm |
| Wheelbase Size | 2310 mm | 2630 mm |
