1991 Beijing BJ 212 vs. 2010 Audi A1
To start off, 2010 Audi A1 is newer by 19 year(s). Which means there will be less support and parts availability for 1991 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1991 Beijing BJ 212 would be higher. At 2,068 cc (4 cylinders), 1991 Beijing BJ 212 is equipped with a bigger engine. In terms of performance, 2010 Audi A1 (104 HP @ 4400 RPM) has 17 more horse power than 1991 Beijing BJ 212. (87 HP @ 4250 RPM) In normal driving conditions, 2010 Audi A1 should accelerate faster than 1991 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1991 Beijing BJ 212 weights approximately 490 kg more than 2010 Audi A1.
Because 1991 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2010 Audi A1. In wet, icy, snow, or gravel driving conditions, 1991 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Audi A1 (250 Nm @ 2500 RPM) has 68 more torque (in Nm) than 1991 Beijing BJ 212. (182 Nm @ 2000 RPM). This means 2010 Audi A1 will have an easier job in driving up hills or pulling heavy equipment than 1991 Beijing BJ 212.
Compare all specifications:
1991 Beijing BJ 212 | 2010 Audi A1 | |
Make | Beijing | Audi |
Model | BJ 212 | A1 |
Year Released | 1991 | 2010 |
Engine Size | 2068 cc | 1598 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 87 HP | 104 HP |
Engine RPM | 4250 RPM | 4400 RPM |
Torque | 182 Nm | 250 Nm |
Torque RPM | 2000 RPM | 2500 RPM |
Fuel Type | Diesel | Diesel |
Drive Type | 4WD | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1530 kg | 1040 kg |
Vehicle Length | 3910 mm | 3954 mm |
Vehicle Width | 1760 mm | 1740 mm |
Vehicle Height | 1880 mm | 1416 mm |
Wheelbase Size | 2310 mm | 2469 mm |