1991 BMW 325 vs. 2009 Mazda 6

To start off, 2009 Mazda 6 is newer by 18 year(s). Which means there will be less support and parts availability for 1991 BMW 325. In addition, the cost of maintenance, including insurance, on 1991 BMW 325 would be higher. At 2,443 cc (6 cylinders), 1991 BMW 325 is equipped with a bigger engine. In terms of performance, 2009 Mazda 6 (147 HP @ 6500 RPM) has 34 more horse power than 1991 BMW 325. (113 HP @ 4800 RPM) In normal driving conditions, 2009 Mazda 6 should accelerate faster than 1991 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 1991 BMW 325 weights approximately 79 kg more than 2009 Mazda 6.

Because 1991 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2009 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 BMW 325 (220 Nm @ 1900 RPM) has 34 more torque (in Nm) than 2009 Mazda 6. (186 Nm @ 4000 RPM). This means 1991 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2009 Mazda 6.

Compare all specifications:

1991 BMW 325 2009 Mazda 6
Make BMW Mazda
Model 325 6
Year Released 1991 2009
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2443 cc 1999 cc
Valves per Cylinder 2 valves 4 valves
Horse Power 113 HP 147 HP
Engine RPM 4800 RPM 6500 RPM
Torque 220 Nm 186 Nm
Torque RPM 1900 RPM 4000 RPM
Engine Bore Size 80 mm 87.5 mm
Engine Stroke Size 81 mm 83.1 mm
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1434 kg 1355 kg
Vehicle Width 1710 mm 1800 mm
Wheelbase Size 2710 mm 2730 mm
Fuel Tank Capacity 70 L 64 L