1991 Chrysler Town & Country vs. 2002 Ford Lynx

To start off, 2002 Ford Lynx is newer by 11 year(s). Which means there will be less support and parts availability for 1991 Chrysler Town & Country. In addition, the cost of maintenance, including insurance, on 1991 Chrysler Town & Country would be higher. At 3,301 cc (6 cylinders), 1991 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 1991 Chrysler Town & Country (150 HP @ 4800 RPM) has 42 more horse power than 2002 Ford Lynx. (108 HP @ 5500 RPM). In normal driving conditions, 1991 Chrysler Town & Country should accelerate faster than 2002 Ford Lynx. With that said, vehicle weight also plays an important factor in acceleration. 1991 Chrysler Town & Country weights approximately 520 kg more than 2002 Ford Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Chrysler Town & Country (251 Nm @ 3600 RPM) has 106 more torque (in Nm) than 2002 Ford Lynx. (145 Nm @ 4000 RPM). This means 1991 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 2002 Ford Lynx.

Compare all specifications:

1991 Chrysler Town & Country 2002 Ford Lynx
Make Chrysler Ford
Model Town & Country Lynx
Year Released 1991 2002
Engine Position Front Front
Engine Size 3301 cc 1596 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 150 HP 108 HP
Engine RPM 4800 RPM 5500 RPM
Torque 251 Nm 145 Nm
Torque RPM 3600 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Vehicle Weight 1630 kg 1110 kg
Vehicle Length 4890 mm 4480 mm
Vehicle Width 1840 mm 1700 mm
Vehicle Height 1690 mm 1420 mm
Wheelbase Size 3040 mm 2620 mm