1991 Fiat Panda vs. 1970 Holden Monaro

To start off, 1991 Fiat Panda is newer by 21 year(s). Which means there will be less support and parts availability for 1970 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1970 Holden Monaro would be higher. At 4,139 cc (8 cylinders), 1970 Holden Monaro is equipped with a bigger engine. In terms of performance, 1970 Holden Monaro (182 HP @ 4400 RPM) has 131 more horse power than 1991 Fiat Panda. (51 HP @ 5200 RPM) In normal driving conditions, 1970 Holden Monaro should accelerate faster than 1991 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1970 Holden Monaro weights approximately 600 kg more than 1991 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1991 Fiat Panda is four wheel drive (4WD), it will have significant more traction and grip than 1970 Holden Monaro. In wet, icy, snow, or gravel driving conditions, 1991 Fiat Panda will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Holden Monaro (356 Nm @ 2400 RPM) has 270 more torque (in Nm) than 1991 Fiat Panda. (86 Nm @ 3000 RPM). This means 1970 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1991 Fiat Panda.

Compare all specifications:

1991 Fiat Panda 1970 Holden Monaro
Make Fiat Holden
Model Panda Monaro
Year Released 1991 1970
Engine Position Front Front
Engine Size 1108 cc 4139 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line in-line
Horse Power 51 HP 182 HP
Engine RPM 5200 RPM 4400 RPM
Torque 86 Nm 356 Nm
Torque RPM 3000 RPM 2400 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Vehicle Weight 760 kg 1360 kg
Vehicle Length 3410 mm 4700 mm
Vehicle Width 1500 mm 1840 mm
Vehicle Height 1440 mm 1400 mm
Wheelbase Size 2170 mm 2830 mm