1991 Fiat Tipo vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 17 year(s). Which means there will be less support and parts availability for 1991 Fiat Tipo. In addition, the cost of maintenance, including insurance, on 1991 Fiat Tipo would be higher. At 1,993 cc (4 cylinders), 1991 Fiat Tipo is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1991 Fiat Tipo weights approximately 220 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Fiat Tipo (173 Nm @ 5000 RPM) has 63 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1991 Fiat Tipo will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
1991 Fiat Tipo | 2008 Ford Bantam | |
Make | Fiat | Ford |
Model | Tipo | Bantam |
Year Released | 1991 | 2008 |
Body Type | Hatchback | Pickup |
Engine Position | Front | Front |
Engine Size | 1993 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 145 HP | 0 HP |
Torque | 173 Nm | 110 Nm |
Torque RPM | 5000 RPM | 3000 RPM |
Engine Bore Size | 84 mm | 74 mm |
Engine Stroke Size | 90 mm | 75.5 mm |
Engine Compression Ratio | 10.5:1 | 10.2:1 |
Top Speed | 208 km/hour | 158 km/hour |
Acceleration 0-100mph | 8.4 seconds | 12.9 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 5 doors | 2 doors |
Vehicle Weight | 1180 kg | 960 kg |
Vehicle Length | 3960 mm | 4280 mm |
Vehicle Width | 1710 mm | 1470 mm |
Vehicle Height | 1440 mm | 1640 mm |
Wheelbase Size | 2550 mm | 2670 mm |
Fuel Tank Capacity | 52 L | 54 L |