1991 Ford Falcon vs. 1979 Opel Kadett

To start off, 1991 Ford Falcon is newer by 12 year(s). Which means there will be less support and parts availability for 1979 Opel Kadett. In addition, the cost of maintenance, including insurance, on 1979 Opel Kadett would be higher. At 4,942 cc (8 cylinders), 1991 Ford Falcon is equipped with a bigger engine. In terms of performance, 1991 Ford Falcon (221 HP @ 4500 RPM) has 174 more horse power than 1979 Opel Kadett. (47 HP @ 5600 RPM). In normal driving conditions, 1991 Ford Falcon should accelerate faster than 1979 Opel Kadett. With that said, vehicle weight also plays an important factor in acceleration. 1991 Ford Falcon weights approximately 785 kg more than 1979 Opel Kadett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Ford Falcon (388 Nm @ 3000 RPM) has 317 more torque (in Nm) than 1979 Opel Kadett. (71 Nm @ 3400 RPM). This means 1991 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1979 Opel Kadett.

Compare all specifications:

1991 Ford Falcon 1979 Opel Kadett
Make Ford Opel
Model Falcon Kadett
Year Released 1991 1979
Engine Position Front Front
Engine Size 4942 cc 993 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 221 HP 47 HP
Engine RPM 4500 RPM 5600 RPM
Torque 388 Nm 71 Nm
Torque RPM 3000 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1575 kg 790 kg
Vehicle Length 4820 mm 3900 mm
Vehicle Width 1860 mm 1590 mm
Vehicle Height 1410 mm 1320 mm
Wheelbase Size 2800 mm 2640 mm