1991 Ford Scorpio vs. 2003 MCC ForTwo

To start off, 2003 MCC ForTwo is newer by 12 year(s). Which means there will be less support and parts availability for 1991 Ford Scorpio. In addition, the cost of maintenance, including insurance, on 1991 Ford Scorpio would be higher. At 1,998 cc (4 cylinders), 1991 Ford Scorpio is equipped with a bigger engine. In terms of performance, 1991 Ford Scorpio (108 HP @ 5600 RPM) has 59 more horse power than 2003 MCC ForTwo. (49 HP @ 5250 RPM). In normal driving conditions, 1991 Ford Scorpio should accelerate faster than 2003 MCC ForTwo. With that said, vehicle weight also plays an important factor in acceleration. 1991 Ford Scorpio weights approximately 525 kg more than 2003 MCC ForTwo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Ford Scorpio (177 Nm @ 3000 RPM) has 97 more torque (in Nm) than 2003 MCC ForTwo. (80 Nm @ 1800 RPM). This means 1991 Ford Scorpio will have an easier job in driving up hills or pulling heavy equipment than 2003 MCC ForTwo.

Compare all specifications:

1991 Ford Scorpio 2003 MCC ForTwo
Make Ford MCC
Model Scorpio ForTwo
Year Released 1991 2003
Engine Position Front Rear
Engine Size 1998 cc 698 cc
Engine Cylinders 4 cylinders 3 cylinders
Engine Type in-line in-line
Horse Power 108 HP 49 HP
Engine RPM 5600 RPM 5250 RPM
Torque 177 Nm 80 Nm
Torque RPM 3000 RPM 1800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Vehicle Weight 1255 kg 730 kg
Vehicle Length 4750 mm 2510 mm
Vehicle Width 1770 mm 1550 mm
Vehicle Height 1400 mm 1540 mm
Wheelbase Size 2770 mm 1810 mm