1991 Holden Statesman vs. 1980 Lancia Trevi
To start off, 1991 Holden Statesman is newer by 11 year(s). Which means there will be less support and parts availability for 1980 Lancia Trevi. In addition, the cost of maintenance, including insurance, on 1980 Lancia Trevi would be higher. At 4,987 cc (8 cylinders), 1991 Holden Statesman is equipped with a bigger engine. In terms of performance, 1991 Holden Statesman (223 HP @ 4400 RPM) has 123 more horse power than 1980 Lancia Trevi. (100 HP @ 5800 RPM). In normal driving conditions, 1991 Holden Statesman should accelerate faster than 1980 Lancia Trevi. With that said, vehicle weight also plays an important factor in acceleration. 1991 Holden Statesman weights approximately 420 kg more than 1980 Lancia Trevi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1991 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1980 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Holden Statesman (385 Nm @ 3600 RPM) has 250 more torque (in Nm) than 1980 Lancia Trevi. (135 Nm @ 3000 RPM). This means 1991 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1980 Lancia Trevi. 1991 Holden Statesman has automatic transmission and 1980 Lancia Trevi has manual transmission. 1980 Lancia Trevi will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1991 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1991 Holden Statesman | 1980 Lancia Trevi | |
Make | Holden | Lancia |
Model | Statesman | Trevi |
Year Released | 1991 | 1980 |
Engine Position | Front | Front |
Engine Size | 4987 cc | 1585 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 223 HP | 100 HP |
Engine RPM | 4400 RPM | 5800 RPM |
Torque | 385 Nm | 135 Nm |
Torque RPM | 3600 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1565 kg | 1145 kg |
Vehicle Length | 4970 mm | 4330 mm |
Vehicle Width | 1820 mm | 1720 mm |
Vehicle Height | 1430 mm | 1410 mm |
Wheelbase Size | 2830 mm | 2550 mm |