1991 Italdesign M12 vs. 2003 Subaru R2
To start off, 2003 Subaru R2 is newer by 12 year(s). Which means there will be less support and parts availability for 1991 Italdesign M12. In addition, the cost of maintenance, including insurance, on 1991 Italdesign M12 would be higher. At 4,988 cc (12 cylinders), 1991 Italdesign M12 is equipped with a bigger engine. In terms of performance, 1991 Italdesign M12 (300 HP) has 238 more horse power than 2003 Subaru R2. (62 HP). In normal driving conditions, 1991 Italdesign M12 should accelerate faster than 2003 Subaru R2.
Because 1991 Italdesign M12 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1991 Italdesign M12. However, in wet, icy, snow, or gravel driving conditions, 2003 Subaru R2, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Italdesign M12 (450 Nm) has 347 more torque (in Nm) than 2003 Subaru R2. (103 Nm). This means 1991 Italdesign M12 will have an easier job in driving up hills or pulling heavy equipment than 2003 Subaru R2.
Compare all specifications:
1991 Italdesign M12 | 2003 Subaru R2 | |
Make | Italdesign | Subaru |
Model | M12 | R2 |
Year Released | 1991 | 2003 |
Body Type | Coupe | Hatchback |
Engine Position | Middle | Front |
Engine Size | 4988 cc | 658 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 300 HP | 62 HP |
Torque | 450 Nm | 103 Nm |
Engine Bore Size | 84.1 mm | 56 mm |
Engine Stroke Size | 74.9 mm | 66.8 mm |
Drive Type | Rear | Front |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Length | 4380 mm | 3400 mm |
Vehicle Width | 1990 mm | 1480 mm |
Vehicle Height | 1120 mm | 1530 mm |
Wheelbase Size | 2600 mm | 2370 mm |