1991 Italdesign M12 vs. 2010 Ford F-250
To start off, 2010 Ford F-250 is newer by 19 year(s). Which means there will be less support and parts availability for 1991 Italdesign M12. In addition, the cost of maintenance, including insurance, on 1991 Italdesign M12 would be higher. At 5,400 cc (8 cylinders), 2010 Ford F-250 is equipped with a bigger engine. In terms of performance, both vehicles can yield 300 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford F-250 (494 Nm) has 44 more torque (in Nm) than 1991 Italdesign M12. (450 Nm). This means 2010 Ford F-250 will have an easier job in driving up hills or pulling heavy equipment than 1991 Italdesign M12.
Compare all specifications:
| 1991 Italdesign M12 | 2010 Ford F-250 | |
| Make | Italdesign | Ford |
| Model | M12 | F-250 |
| Year Released | 1991 | 2010 |
| Body Type | Coupe | Pickup |
| Engine Position | Middle | Front |
| Engine Size | 4988 cc | 5400 cc |
| Engine Cylinders | 12 cylinders | 8 cylinders |
| Engine Type | V | V |
| Horse Power | 300 HP | 300 HP |
| Torque | 450 Nm | 494 Nm |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Length | 4380 mm | 6253 mm |
| Vehicle Width | 1990 mm | 2029 mm |
| Vehicle Height | 1120 mm | 1961 mm |
| Wheelbase Size | 2600 mm | 3967 mm |
